Friday, August 30, 2013

The Blinker - Your first program






In my previous post, I gave you a brief introduction to PIC 16f84A microcontroller. There’s a lot more to cover before moving on to programming section. But, I have decided to show you a simple assembly program, just to keep you guys interested in this topic and to understand the basic concepts. It will blink two LEDs as in an LED robot circuit.
To write and run this program, you’ll need the following softwares.
  • MPLAB IDE- a free assembly language compiler provided by Microchip, the manufacturer of PIC microcontrollers.
  • Proteus ISIS- to simulate your program before going to hardware level.
Follow these steps after downloading the required softwares.
1. Install MPLAB IDE.
2. Go to File>>New.
3. Go to Configure>>Select Device and select PIC16F84A.

 
   4. Type(or copy) following assembly code into the code window. Don’t worry if you don’t understand the code.
;;;;;;define registers;;;;;;;
STATUS equ 03h
TRISA     equ 85h
PORTA   equ 05h
COUNT  equ 08h
;;;;;;configure I/O ports;;;;;;;
bsf   STATUS,5
movlw  00h
movwf  TRISA
bcf    STATUS,5
;;;;;;Turn LED1 on,LED2 off;;;;;;;;;;
Begin  movlw  01h
            movwf  PORTA
;;;;;;Call the delay;;;;;;;
call  Delay
;;;;;;Turn LED1 off,LED2 on;;;;;;;;
movlw  02h
movwf  PORTA
;;;;;;Call Delay again;;;;;
call  Delay
;;;;;go back to the beginning;;;;;;
goto  Begin
;;;;;Delay subroutine;;;;;
Delay
Loop  decfsz COUNT,1
           goto Loop
return
;;;;;end of program;;;;;
end
5. Save it somewhere in your hard drive as “firstprog.asm”. Remember this location.
 
 
 
6. Now, go to Project>>Quick Build(firstprog.asm)
If you have followed so far properly, you should get a message which says “BUILD SUCCEEDED”. Now you have successfully compiled your program.
You’ll find a file named firstprog.HEX, where you have saved the program code. It is the firmware which we place in the PIC microcontroller. Now we are ready to do a simulation of the program.

Simulation

1. Download Proteus ISIS and launch it.
2. Click on “Component mode” icon at the left corner and double click on the white area under “Devices”.
 
3. Then, you can search and select any device you want. In this case, we need 2 LEDs and one PIC18F84A microcontroller. Type the microcontroller number in the search box. The results will be displayed in the field to the right. Double click on the selected component, so it would be added to your list of devices.
 
4. Design the circuit as shown in the following picture.(Check the Youtube video below)
5. Double click on the PIC16F84A and locate the firstprog.HEX file.
6. The Blinker is now ready to run. So finally, hit the “play” button in the bottom left corner of the screen to begin the simulation.
 
If everything goes alright, The Blinker will start blinking, one LED at a time.
 

Wednesday, August 28, 2013

Introduction to PIC microcontrollers


Hello everyone. I’m going to start a new tutorial series on pic programming, which could be very useful for beginners. First, I wish to give a brief description on microcontrollers and then move on to the next section, PIC16f84a programming using C language. Once you have understood the basics of the PIC, let’s move on to PIC18 series.

What is a microcontroller?

PIC18F8720 microcontroller

 

In brief, microcontroller is a kind of a small computer, packed in a small IC. Think of an ordinary computer for an instance. They come with a RAM, ROM, CPU, Hard drive, Input/Output devices, ports and a mainboard to connect them all together. In a microcontrollers also, all those things are there, but they are built in and sealed. So it’s not possible to change hardware configurations as we wish.

Applications of microcontrollers


Microcontroller based systems
Nowadays, there are microcontroller based systems in almost all of the electronic appliances. They are there in TV sets, DVD players, microwave ovens and everything. Even the remote controller of a TV or the LCD display of a microwave oven are driven by microcontrollers. So it’s very important for any IT/ electrical/electronic professional  to have a good knowledge about these devices.

PIC16F84A Microcontroller


PIC16F84A microcontroller
 
This is a small microcontroller, manufactured by “Microchip”, one of the leading semiconductor manufacturers. There are 18 pins, arranged as 9 in a side.

PIC16F84A pinout
 

PORTA(RA0 to RA4)

PortA or RA is an I/O port, which could be used as an input or as an output. The port has 5 pins, so it could work as a 5 bit port, where the bit numbers are from RA0 to RA4.
 

PORTB(RB0 to RB7)

PORTB also similar to PORTA, except the fact that it has 8 bits.

OSC1 and OSC2(CLK IN and CLK OUT)

An external oscillator is connected to these pins. (In this case, we wish to use a 4MHz crystal oscillator.)

VSS, VDD and MCLR

VSS is the positive power supply of the PIC. VDD is the negative power supply pin. MCLR is used when we program the PIC microcontroller. However, it is normally connected to the positive power supply pin using a resistor.

INT

INT pin is used to get a special input called “interrupts” . More on this pin comes later.

If you don’t get any of these things, just relax. You’ll understand everything when we start to write programs, which means from next post onwards.
Got any doubts? Feel free to post a comment. I’ll reply ASAP.